User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Starting up
- 6 Connections and controls
- 7 Operating
- 7.1 Starting the device
- 7.2 Main menu
- 7.3 Menu overview
- 7.4 Functions in 3-channel DMX mode
- 7.5 Functions in 4-channel DMX mode 1
- 7.6 Functions in 4-channel DMX mode 2
- 7.7 Functions in 5-channel DMX mode
- 7.8 Functions in 7-channel DMX mode
- 7.9 Functions in 16-channel DMX mode 1
- 7.10 Functions in 16-channel DMX mode 2
- 7.11 Functions in 22-channel DMX mode
- 7.12 Functions in 34-channel DMX mode
- 8 Technical specifications
- 9 Plug and connection assignments
- 10 Troubleshooting
- 11 Cleaning
- 12 Protecting the environment
7 Operating
7.1 Starting the device
Connect the device to the power supply to start operation. The display shows
‘Software-Update ‘Please Wait - Welcome to LED Wash Zoom’’
. During the start-up
process, the display shows the model name and the software version of the device
successively. The device is then ready for use. The display shows the operating mode
that was selected when the unit was last powered o.
7.2 Main menu
If the display is in standby, unlock it: Press successively [UP], [DOWN], [UP], [DOWN]
and [ENTER].
Press [MODE] to activate the main menu. Use [UP] or [DOWN] to select a submenu.
When the display shows the desired submenu press [ENTER] to open it up. To close
the main menu, press [MODE]. The stored values are displayed in white in the display.
Changed values are displayed in red until they are conrmed with [ENTER].
Operating
Co6z LED Zoom Flood IP65 270W RGBW
15
LED oodlight