User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Starting up
- 6 Connections and controls
- 7 Operating
- 7.1 Starting the device
- 7.2 Main menu
- 7.3 Menu overview
- 7.4 Functions in 2-channel DMX mode
- 7.5 Functions in 3-channel DMX mode 1
- 7.6 Functions in 3-channel DMX mode 2
- 7.7 Functions in 4-channel DMX mode
- 7.8 Functions in 6-channel DMX mode
- 7.9 Functions in 12-channel DMX mode
- 7.10 Functions in 14-channel DMX mode
- 7.11 Functions in 26-channel DMX mode
- 8 Technical specifications
- 9 Plug and connection assignments
- 10 Troubleshooting
- 11 Cleaning
- 12 Protecting the environment
Main menu Menu level 2 Menu level 3 Menu level 4
Meaning
‘Hold’ Retaining last settings
‘Blackout’ Blackout
‘Dimmer Curve’ Dimmer curve
‘Linear’ Linear
‘Exp’ Exponential
‘Log’ Logarithmic
‘S Curve’ S-shaped
‘Dimmer Response’ Dimmer characteristic
‘LED’ Dimmer characteristic ‘LED’ (3 s delay)
‘Halogen’ Dimmer characteristic ‘Halogen’ (5 s delay)
‘LED Frequency’ ‘800 Hz’ Refresh rate of the LEDs: 800 Hz
‘1200 Hz’ Refresh rate of the LEDs: 1200 Hz
‘2000 Hz’ Refresh rate of the LEDs: 2000 Hz
‘3600 Hz’ Refresh rate of the LEDs: 3600 Hz
‘25 KHz’ Refresh rate of the LEDs: 25 kHz
‘White Balance’ White balance
‘Red’ 0…255 Red proportion
‘Green’ 0…255 Green proportion
‘Blue’ 0…255 Blue proportion
‘White’ 0…255 White proportion
‘Fan Set’ Fan speed
‘Regular’ If the temperature exceeds the threshold, the fan
speed will increase.
‘Silent’ If the temperature exceeds the threshold, the
light output is reduced; fan speed remains the
same.
‘Wireless DMX’ Resetting the wireless DMX connection
‘Reset Wireless DMX
Memory’
‘No’ The wireless DMX con‐
nection is not getting
reset
‘Yes’ The wireless DMX con‐
nection is getting reset
‘Test’ Automatic self test
‘OFF’ Turned o
‘ON’ On
‘Factory Reset’ Reset to factory defaults
‘OFF’ Turned o
‘ON’ Starting
Operating
Co6 V2 LED Flood IP65 270W RGBW
19
LED Floodlight