User manual

1. Press [Mode] and use [Up] or [Down] to select the menu item ‘SETTINGS’ . Conrm with
[Setup].
2. Use [Up] or [Down] to select the menu item ‘Factory Reset’ . Conrm with [Setup].
3. Use [Up] or [Down] to select the menu item ‘Yes’ to reset the device to factory defaults or
select the menu item ‘NO’ to retain the stored settings.
4. Press [Setup] to accept the selection.
1. Press [Mode] and use [Up] or [Down] to select the menu item ‘INFO’ . Conrm with
[Setup].
2. Use [Up] or [Down] to select the menu item ‘Temperature’ . Conrm with [Setup].
ð
The display shows the current device temperature.
3. Press [Setup] to close the menu.
NOTICE!
If the device overheats, the display shows ‘Error’ . Switch o the device.
Resetting the device to factory
settings
Device temperature
Operating
32
ACL LED Par 64
LED PAR