User manual

1. Press [Mode] and use [Up] or [Down] to select the menu item ‘SETTINGS’ . Conrm with
[Setup].
2. Use [Up] or [Down] to select the menu item ‘CALIBRAT.’ . Conrm with [Setup].
3. Press [Up] or [Down] until the password 088 appears in the display. Conrm with [Setup].
4. Use [Up] or [Down] to select the menu item for which the calibration is to be carried out.
The following table shows the available options.
Menu level 2 Menu level 3 Menu level 4 Function
‘CALIBRAT.’ ‘Password’
(088)
‘Dimmer Fine 000’ …
‘Dimmer Fine 255’
Dimmer ne calibra‐
tion
‘White Bal 000’ …
‘White Bal 255’
White balance cali‐
bration
‘Default Yes’ / ‘Default No’ Default values of the
device
5. Press [Setup] to accept the selection.
Calibration
Operating
ACL LED Par 64
31
LED PAR