User manual

1. Press [Mode] and use [Up] or [Down] to select the menu item ‘SETTINGS’ . Conrm with
[Setup].
2. Use [Up] or [Down] to select the menu item ‘Dmx Fail’ . Conrm with [Setup].
3. Use [Up] or [Down] to select the device behaviour on DMX signal failure. The following
table shows the available options.
Menu level 2 Menu level 3 Function
‘Dmx Fail’ ‘O’ If the DMX control fails, the device is
blacked out.
‘Hold’ If the DMX control fails, the last set‐
ting is retained.
4. Press [Setup]to accept the selection.
Behaviour on DMX control
failure
Operating
30
ACL LED Par 64
LED PAR