User manual

1. Press [Mode] and use [Up] or [Down] to select the menu item ‘SETTINGS’ . Conrm with
[Setup].
2. Use [Up] or [Down] to select the menu item ‘Curves Select’ . Conrm with [Setup].
3. Use [Up] or [Down] to select the desired dimmer curve. The following table shows the
available options.
Menu level 2 Menu level 3 Function
‘Curves Select’ ‘ Curves 1 linear’ Linear course
‘ Curves 2 Square’ Exponential course
‘Curves 3 Inv Squa’ Logarithmic course
‘Curves 4 S-Type’ S-curve shaped course
4. Press [Setup] to accept the selection.
Dimmer curve
Operating
ACL LED Par 64
27
LED PAR