User manual

1. Press [Mode] and use [Up] or [Down] to select the menu item ‘DIMMER’ . Conrm with
[Setup].
2. Use [Up] or [Down] to select a value between ‘Dimmer Val 000’ (LEDs o) and ‘Dimmer
Val 255’ (full brightness) to adjust the brightness of the LEDs.
3. Press [Setup] to accept the selection.
4. Use [Up] or [Down] to select a value between ‘Flash 000’ and ‘Flash 099’ to set the ash
frequency of the dimmer.
5. Press [Setup] to accept the selection.
Dimmer settings
Operating
26
ACL LED Par 64
LED PAR