User manual

1. Press [Mode] and use [Up] or [Down] to select the menu item ‘SLAVE’ . Conrm with
[Setup].
2. Use [Up] or [Down] to select the menu item ‘Yes’ and conrm with [Setup] to enable the
Slave mode.
ð
The device is now working in slave mode, i.e. it will exactly copy the movement of
the controlling master device, correct wiring provided.
To deactivate slave mode, select ‘No’ and conrm with [Setup].
This setting is only relevant if the device is not controlled via DMX.
1. Press [Mode] and use [Up] or [Down] to select the menu item ‘SOUND’ . Conrm with
[Setup].
2. Use [Up] or [Down] to select a value between ‘Sensitivity 00’ and ‘Sensitivity 31’ to adjust
the sensitivity of the sound control.
3. Press [Setup] to accept the selection.
Slave mode
Sound control
Operating
ACL LED Par 64
25
LED PAR