User manual

3 Features
Special features of the device:
n 16 × 4 W Philips LEDs, warm white
n Operation in stand-alone, master / slave or DMX mode, sound control
n Electronic dimmer and shutter
n Selectable dimmer curves and modulated halogen dimming eect
n Control via DMX (two modes), via RDM or via buttons and display on the unit
n Robust metal housing with two-part bracket and colour lter holder
n Suitable for use in clubs, bars and on stages
The device supports RDM protocol communication (Remote Device Management) according
to ANSI / ESTA E1.20. It can exchange information with an RDM-compatible controller. Also
observe the instruction manual of the controller.
For technological reasons, the light output of LEDs decreases over their lifetime. This eect
increases with higher operating temperature. You can extend the service life of the illuminants
by providing adequate ventilation and operating the LEDs with the lowest possible brightness.
Remote Device Management
(RDM)
Features
14
ACL LED Par 64
LED PAR