User manual

In this menu, you can adjust the LED brightness.
Press [MENU]. Press [UP] or [DOWN] repeatedly until the display shows ‘Stand Alone’ and con‐
rm with [ENTER]. Use [UP] or [DOWN] to select the menu item ‘Static’ and then the menu item
‘Dimmer’ and conrm with [ENTER]. Use [UP] or [DOWN] to specify a value between ‘0’ (LED
o) and ‘255’ (full brightness).
This setting is only relevant if the device is not controlled via DMX. When the display shows the
desired value press [ENTER] to conrm the selection and then [MENU] to return to the parent
menu. To return to the parent menu without changes press [MENU] without prior conrma‐
tion.
In this menu, you can ne-adjust the LED brightness.
Press [MENU]. Press [UP] or [DOWN] repeatedly until the display shows ‘Stand Alone’ and con‐
rm with [ENTER]. Use [UP] or [DOWN] to select the menu item ‘Dimmer Fine’ and conrm with
[ENTER]. Use [UP] or [DOWN] to specify a value between ‘0’ (LED o) and ‘255’ (full brightness).
This setting is only relevant if the device is not controlled via DMX. When the display shows the
desired value press [ENTER] to conrm the selection and then [MENU] to return to the parent
menu. To return to the parent menu without changes press [MENU] without prior conrma‐
tion.
Dimmer setting
Dimmer ne adjustment
Operating
30
2bright Prole 3K 26°
LED spotlight