User manual

Press [MENU]. Press [UP] or [DOWN] until the display shows ‘DMX Mode’ and conrm the selec‐

tion with [ENTER]. Use [UP] or [DOWN] to select one of the three DMX modes (1-channel mode,

2-channel mode or 4-channel mode, display shows ‘1CH’ , ‘2CH’ or ‘4CH’ ). The device is now

controlled by a DMX controller.

When the display shows the desired value conrm the setting with [SET]. To exit the menu

item without making changes, press [ESC].

In this menu, you can specify whether the device is operating in slave mode.

Press [MENU]. Press [UP] or [DOWN] repeatedly until the display shows ‘Slave’ and conrm with

[ENTER]. Use [UP] or [DOWN] to select ‘Yes’ to use the device as a slave, choose ‘No’ to deacti‐

vate the slave mode.

Conrm the selection with [ENTER]. With [MENU], you return to the parent menu.

To return to the parent menu without changes press [MENU] without prior conrmation.

DMX mode

Operating mode Slave

Operating

2bright Prole 3K 26°

LED spotlight