User manual 2bright Profile 3K 26° LED spotlight
Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 Internet: www.thomann.de 24.03.
Table of contents Table of contents 1 General information................................................................................................................................. 1.1 Further information........................................................................................................................... 1.2 Notational conventions.................................................................................................................... 1.3 Symbols and signal words.....
Table of contents 7.6 Functions in 4-channel DMX mode........................................................................................... 42 4 2bright Profile 3K 26° LED spotlight 8 Technical specifications....................................................................................................................... 44 9 Plug and connection assignments.................................................................................................. 46 10 Troubleshooting..............
2bright Profile 3K 26° LED spotlight 5
General information 1 General information This user manual contains important information on the safe operation of the device. Read and follow all safety notes and all instructions. Save this manual for future reference. Make sure that it is available to all persons using this device. If you sell the device to another user, be sure that they also receive this manual. Our products and user manuals are subject to a process of continuous development.
General information 1.1 Further information On our website (www.thomann.de) you will find lots of further information and details on the following points: Download This manual is also available as PDF file for you to download. Keyword search Use the search function in the electronic version to find the topics of interest for you quickly. Online guides Our online guides provide detailed information on technical basics and terms.
General information 1.2 Notational conventions This manual uses the following notational conventions: Letterings The letterings for connectors and controls are marked by square brackets and italics. Examples: [VOLUME] control, [Mono] button. Displays Texts and values displayed on the device are marked by quotation marks and italics. Examples: ‘24ch’ , ‘OFF’ . 1.3 Symbols and signal words In this section you will find an overview of the meaning of symbols and signal words that are used in this manual.
General information Signal word Meaning DANGER! This combination of symbol and signal word indicates an immediate dangerous situation that will result in death or serious injury if it is not avoided. WARNING! This combination of symbol and signal word indicates a pos‐ sible dangerous situation that can result in death or serious injury if it is not avoided.
General information Warning signs Type of danger Warning – suspended load. Warning – danger zone.
Safety instructions 2 Safety instructions Intended use This device is intended for use as an electronic lighting effect by means of LED technology. The device is designed for professional use only and is not suitable for use in households. Use the device only as described in this user manual. Any other use or use under other operating con‐ ditions is considered to be improper and may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use.
Safety instructions Safety DANGER! Danger for children Ensure that plastic bags, packaging, etc. are disposed of properly and are not within reach of babies and young children. Choking hazard! Ensure that children do not detach any small parts (e.g. knobs or the like) from the unit. They could swallow the pieces and choke! Never let children unattended use electrical devices. DANGER! Electric shock caused by high voltages inside Within the device there are areas where high voltages may be present.
Safety instructions WARNING! Risk of epileptic shock Strobe lighting can trigger seizures in photosensitive epilepsy. Sensitive persons should avoid looking at strobe lights. NOTICE! Operating conditions This device has been designed for indoor use only. To prevent damage, never expose the device to any liquid or moisture. Avoid direct sunlight, heavy dirt, and strong vibrations. Only operate the device within the ambient conditions specified in the chapter ‘Technical specifications’ of this user manual.
Safety instructions NOTICE! Power supply Before connecting the device, ensure that the input voltage (AC outlet) matches the voltage rating of the device and that the AC outlet is protected by a residual current circuit breaker. Failure to do so could result in damage to the device and possibly injure the user. Unplug the device before electrical storms occur and when it is unused for long periods of time to reduce the risk of electric shock or fire.
Features 3 Features Special features of the device: n n n n n n n n n n n n 1 × warm white LED, 200 W Colour temperature: 3000 K Beam angle: 26° Operation in Stand alone or DMX mode (1, 2 or 4 channels) Operating via buttons and display on the unit incl. gobo holder (outer diameter 86.0 mm / image diameter 60.
Features For technological reasons, the light output of LEDs decreases over their lifetime. This effect increases with higher operating temperature. You can extend the service life of the illuminants by providing adequate ventilation and operating the LEDs with the lowest possible brightness.
Installation 4 Installation Unpack and check carefully there is no transportation damage before using the unit. Keep the equipment packaging. To fully protect the product against vibration, dust and moisture during transportation or storage use the original packaging or your own packaging material suitable for transport or storage, respectively. WARNING! Risk of injury caused by falling objects Make sure that the installation complies with the standards and rules that apply in your country.
Installation NOTICE! Risk of overheating The distance between light output and the illuminated surface must be more than 1.5 m (19.7in). Provide sufficient ventilation. The ambient temperature must always be below 40 °C (104 °F). NOTICE! Use of stands When mounting the device onto a stand, ensure that the stand is in a safe and stable position and that the weight of the device does not exceed the maximum permissible load capacity of the stand.
Installation NOTICE! Possible data transmission errors For error-free operation make use of dedicated DMX cables and do not use ordi‐ nary microphone cables. Never connect the DMX input or output to audio devices such as mixers or ampli‐ fiers. Mounting options You can install the unit in hanging position. When in use, the device must always be attached to a solid surface or an approved truss. Use the openings of the bracket provided for mounting.
Installation Please note that this device must not be connected to a dimmer.
Starting up 5 Starting up Create all connections while the device is off. Use the shortest possible high-quality cables for all connections. Take care when running the cables to prevent tripping hazards.
Starting up Connections in DMX mode 22 2bright Profile 3K 26° LED spotlight Connect the DMX input of the device to the DMX output of a DMX controller or another DMX device. Connect the output of the first DMX device to the input of the second one, and so on to form a daisy chain. Always ensure that the output of the last DMX device in the daisy chain is terminated with a resistor (110 Ω, ¼ W).
Starting up Connections in master/slave mode When you configure a group of devices in master/slave mode, the first unit will control the other units for an automatic, sound-activated, synchronized show. This function is ideal when you want to start a show immediately. Connect the DMX output of the master device to the DMX input of the first slave device. Then connect the DMX output of the first slave device to the DMX input of the second slave device and so on.
Connections and controls 6 Connections and controls ö # % & ' Profile 3K ) * MENU POWER IN 100-240V~50/60Hz Watt: 230W $ % 24 2bright Profile 3K 26° LED spotlight & ( UP DOWN ENTER F2AL250V POWER OUT DMX IN max. 16A + , - .
Connections and controls 1 Colour filter holder 2 Locking screw for the focus 3 Insert for Gobo holder and iris (optionally available) 4 Individually operable diaphragm slider 5 Locking screws for the mounting bracket 6 Mounting bracket 7 Locking for the lens barrel 8 Display with function buttons [MENU] Calls up the main menu or a submenu. [UP], [DOWN] Increases / decreases the displayed value by one. [ENTER] Confirms a selected value.
Connections and controls 9 Fuse holder 10 [POWER IN] Lockable input socket (Power Twist) for powering the device 11 [POWER OUT] Lockable output socket (Power Twist) for powering further devices 12 [DMX IN] DMX input 13 [DMX OUT] DMX output 26 2bright Profile 3K 26° LED spotlight
Operating 7 Operating 7.1 Starting the device Connect the device to the power supply to start operation. The device is immediately opera‐ tional and operates in the last mode with the settings last selected. 7.2 Main menu Menu control Press [MENU] to open the main menu. Use [UP] or [DOWN] to select the desired parameter or to change the respectively indicated value. When the display shows the desired parameter or value press [ENTER] to enter the respective submenu or confirm a new value.
Operating DMX address Press [MENU]. Press [UP] or [DOWN] repeatedly until the display shows ‘DMX Address’ and con‐ firm with [ENTER]. Now you can set the number of the first DMX channel to be used by the device (DMX address). Use [UP] or [DOWN] to select a value between 1 and 512. Confirm the selection with [ENTER]. With [MENU], you return to the parent menu. To return to the parent menu without changes press [MENU] without prior confirmation.
Operating DMX mode Press [MENU]. Press [UP] or [DOWN] until the display shows ‘DMX Mode’ and confirm the selec‐ tion with [ENTER]. Use [UP] or [DOWN] to select one of the three DMX modes (1-channel mode, 2-channel mode or 4-channel mode, display shows ‘1CH’ , ‘2CH’ or ‘4CH’ ). The device is now controlled by a DMX controller. When the display shows the desired value confirm the setting with [SET]. To exit the menu item without making changes, press [ESC].
Operating Dimmer setting In this menu, you can adjust the LED brightness. Press [MENU]. Press [UP] or [DOWN] repeatedly until the display shows ‘Stand Alone’ and con‐ firm with [ENTER]. Use [UP] or [DOWN] to select the menu item ‘Static’ and then the menu item ‘Dimmer’ and confirm with [ENTER]. Use [UP] or [DOWN] to specify a value between ‘0’ (LED off) and ‘255’ (full brightness). This setting is only relevant if the device is not controlled via DMX.
Operating Strobe effect In this menu, you can set the Strobe effect frequency. Press [MENU]. Press [UP] or [DOWN] repeatedly until the display shows ‘Stand Alone’ and con‐ firm with [ENTER]. Use [UP] or [DOWN] to select the menu item ‘Strobe’ and confirm with [ENTER]. Use [UP] or [DOWN] to specify the strobe effect frequency in a range from ‘0’ … ‘255’ . Confirm the selection with [ENTER]. With [MENU], you return to the parent menu.
Operating Gamma correction In this menu, you can set the Gamma correction. Press [MENU]. Press [UP] or [DOWN] repeatedly until the display shows ‘Settings’ and confirm with [ENTER]. Use [UP] or [DOWN] to select the menu item ‘Gamma correction’ and confirm with [ENTER]. Use [UP] or [DOWN] to select an option between ‘NO’ , ‘2’ , ‘2,2’ , ‘2,4’ , ‘2,6’ and ‘2,8’ . Confirm the selection with [ENTER]. With [MENU], you return to the parent menu.
Operating Display illumination In this menu, you can set whether the display is automatically switched off or remains perma‐ nently on during operation. Press [MENU]. Press [UP] or [DOWN] repeatedly until the display shows ‘Settings’ and confirm with [ENTER]. Use [UP] or [DOWN] to select the menu item ‘Display Blackout’ and confirm with [ENTER].
Operating Behaviour on DMX control failure In this menu, you can specify the behaviour of the device when the DMX signal is interrupted. Press [MENU]. Press [UP] or [DOWN] repeatedly until the display shows ‘Settings’ and confirm with [ENTER]. Use [UP] or [DOWN] to select the menu item ‘DMX Fail’ and confirm with [ENTER]. Use [UP] or [DOWN] to select the device behaviour on DMX signal failure.
Operating Dimmer curve In this menu, you can set the dimmer curve. Press [MENU]. Press [UP] or [DOWN] repeatedly until the display shows ‘Settings’ and confirm with [ENTER]. Use [UP] or [DOWN] to select the menu item ‘Dimmer Curve’ and confirm with [ENTER]. Use [UP] or [DOWN] to select the desired dimmer curve.
Operating Dimmer response Press [MENU]. Press [UP] or [DOWN] repeatedly until the display shows ‘Settings’ and confirm with [ENTER]. Use [UP] or [DOWN] to select the menu item ‘Dimmer Response’ and confirm with [ENTER]. Use [UP] or [DOWN] to select the desired Dimmer response. The following table shows the available options: Menu level 2 Menu level 3 Function ‘Dimmer Response’ ‘LED’ The dimmer setting for LED is activated.
Operating Key lock In this menu, you can enable the key lock. Press [MENU]. Press [UP] or [DOWN] repeatedly until the display shows ‘Settings’ and confirm with [ENTER]. Use [UP] or [DOWN] to select the menu item ‘AutoLock’ and confirm with [ENTER]. Use [UP] or [DOWN] to select the ‘On’ option to activate the key lock or select the ‘Off’ option to deactivate the key lock. Confirm the selection with [ENTER]. With [MENU], you return to the parent menu.
Operating Resetting the device to factory settings In this menu, you can reset the device to factory default settings. Press [MENU]. Press [UP] or [DOWN] repeatedly until the display shows ‘Settings’ and confirm with [ENTER]. Use [UP] or [DOWN] to select the menu item ‘Factory Reset’ and confirm with [ENTER]. The display shows ‘Reset’ . Confirm with [ENTER] to reset the device to factory default settings. With [MENU], you return to the parent menu.
Operating Operating hours In this menu, you can call up the number of operating hours. Press [MENU]. Press [UP] or [DOWN] repeatedly until the display shows ‘System Info’ and con‐ firm with [ENTER]. Use [UP] or [DOWN] to select the menu item ‘Operation Hours’ and confirm with [ENTER]. The number of operating hours is displayed. With [MENU], you return to the parent menu.
Operating 7.
Operating 7.4 Functions in 1-channel DMX mode Channel Value Function 1 0 … 255 Dimmer (0 % to 100 %) 7.
Operating 7.
Operating Channel 4 Value Function 006 … 127 Dimmer setting for LED 128 … 255 Imitation of the dimming behaviour for halogen light 000 … 005 No function 006 … 063 Dimmer curve, linear course 064 … 127 Dimmer curve, exponential course 128 … 191 Dimmer curve, logarithmic course 192 … 255 Dimmer curve, S-shaped course 2bright Profile 3K 26° LED spotlight 43
Technical specifications 8 Technical specifications Light source 1 × LED warm white, 200 W Light source properties Colour temperature 3000 K 700 mm Colour rendering index >98 CRI Ra Optical properties Beam angle Control DMX Buttons and display on the unit Number of DMX channels 1, 2 or 4 Input connections Power supply Lockable input socket (Power Twist) DMX control XLR chassis socket, 3-pin Power supply Lockable output socket (Power Twist) DMX control XLR chassis socket, 3-pin Output
Technical specifications Further information Supply voltage 100 - 240 V Fuse 5 mm × 20 mm, 2 A, 250 V, fast-acting Degree of protection IP30 Mounting options hanging Dimensions (W × H × D) 230 mm × 230 mm × 700 mm Weight 6 kg Ambient conditions Temperature range –10 °C…45 °C Relative humidity 20 %…80 % (non-condensing) 50/60 Hz Construction Complete device Light source LED Fanless No Zoom No 2bright Profile 3K 26° LED spotlight 45
Plug and connection assignments 9 Plug and connection assignments Introduction This chapter will help you select the right cables and plugs to connect your valuable equip‐ ment so that a perfect light experience is guaranteed.
Troubleshooting 10 Troubleshooting NOTICE! Possible data transmission errors For error-free operation make use of dedicated DMX cables and do not use ordi‐ nary microphone cables. Never connect the DMX input or output to audio devices such as mixers or ampli‐ fiers. In the following we list a few common problems that may occur during operation.
Troubleshooting Symptom Remedy The unit does not work, no light. Check the mains connection and the fuse. No response to the DMX con‐ troller. 1. Check the DMX ports and cables for proper connection. 2. Check the address settings and the DMX polarity. 3. Try using another DMX controller. 4. Check to see if the DMX cables run near or alongside to high voltage cables that may cause damage or interfer‐ ence to DMX interface circuits.
Cleaning 11 Cleaning Optical lenses Clean the optical lenses, that are accessible from the outside, regularly in order to optimize the light output. The frequency of cleaning depends on the operating environment: wet, smoky or particularly dirty surroundings can cause more accumulation of dirt on the optics of the device. n Clean with a soft cloth using our lamp and lens cleaner (item no. 280122). n Always dry the parts carefully.
Protecting the environment 12 Protecting the environment Disposal of the packaging mate‐ rial For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the notes and markings on the packaging.
Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.
