User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Starting up
- 6 Connections and controls
- 7 Operating
- 7.1 Starting the device
- 7.2 Operating on the unit
- 7.3 Menu overview
- 7.4 Functions in 1-channel DMX mode
- 7.5 Functions in 2-channel DMX mode, variant A
- 7.6 Functions in 2-channel DMX mode, variant B
- 7.7 Functions in 3-channel DMX mode
- 7.8 Functions in 5-channel DMX mode, variant A
- 7.9 Functions in 5-channel DMX mode, variant B
- 7.10 Functions in 9-channel DMX mode
- 7.11 Colour temperature adjustment via DMX
- 8 Technical specifications
- 9 Plug and connection assignments
- 10 Troubleshooting
- 11 Cleaning
- 12 Protecting the environment
1. Press [MENU] and then [UP] or [DOWN] repeatedly until the display shows ‘Settings’ .
Conrm with [ENTER].
2. Press [UP] or [DOWN] repeatedly until the display shows ‘PWM Rate’ . Conrm with
[ENTER].
3. Use [UP] or [DOWN] to select the value for the LED repetition rate. The following table
shows the available options.
Menu level 3 Function
‘900Hz’ PWM 900 Hz
‘1000Hz’ PWM 1.0 kHz
‘1100Hz’ PWM 1.1 kHz
‘1200Hz’ PWM 1.2 kHz
‘1300Hz’ PWM 1.3 kHz
‘1400Hz’ PWM 1.4 kHz
‘1500Hz’ PWM 1.5 kHz
LED repetition rate (PWM)
Operating
40
2bright Pint TW200 IP
LED PAR