User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Starting up
- 6 Connections and controls
- 7 Operating
- 7.1 Starting the device
- 7.2 Operating on the unit
- 7.3 Menu overview
- 7.4 Functions in 1-channel DMX mode
- 7.5 Functions in 2-channel DMX mode, variant A
- 7.6 Functions in 2-channel DMX mode, variant B
- 7.7 Functions in 3-channel DMX mode
- 7.8 Functions in 5-channel DMX mode, variant A
- 7.9 Functions in 5-channel DMX mode, variant B
- 7.10 Functions in 9-channel DMX mode
- 7.11 Colour temperature adjustment via DMX
- 8 Technical specifications
- 9 Plug and connection assignments
- 10 Troubleshooting
- 11 Cleaning
- 12 Protecting the environment
1. Press [MENU] and then [UP] or [DOWN] repeatedly until the display shows ‘Settings’ .
Conrm with [ENTER].
2. Press [UP] or [DOWN] repeatedly until the display shows ‘Dimmer Curve’ . Conrm with
[ENTER].
3. Use [UP] or [DOWN] to select the desired dimmer curve.
The following sub menus are available:
Menu level 3 Function
‘Linear’ without fade time: Rise time 0 ms, fall time 0 ms
Fade time 1 s: Rise time 0 ms, fall time 0 ms
‘Stage’ without fade time: Rise time 780 ms, fall time 1100 ms
Fade time 1 s: Rise time 1540 ms, fall time 1660 ms
‘TV’ without fade time: Rise time 1180 ms, fall time 1520 ms
Fade time 1 s: Rise time 1860 ms, fall time 1940 ms
‘Architectural’ without fade time: Rise time 1380 ms, fall time 1730 ms
Setting the dimmer curve
DIMMER
100%
50%
10%
0%
0 Sec Rise Time Down Time
Time (ms)
0
255
no Fade Time
0
255
1 sec Fade Time
Operating
2bright Pint TW200 IP
35
LED PAR