User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Starting up
- 6 Connections and controls
- 7 Operating
- 7.1 Starting the device
- 7.2 Operating on the unit
- 7.3 Menu overview
- 7.4 Functions in 1-channel DMX mode
- 7.5 Functions in 2-channel DMX mode, variant A
- 7.6 Functions in 2-channel DMX mode, variant B
- 7.7 Functions in 3-channel DMX mode
- 7.8 Functions in 5-channel DMX mode, variant A
- 7.9 Functions in 5-channel DMX mode, variant B
- 7.10 Functions in 9-channel DMX mode
- 7.11 Colour temperature adjustment via DMX
- 8 Technical specifications
- 9 Plug and connection assignments
- 10 Troubleshooting
- 11 Cleaning
- 12 Protecting the environment
1. Press [MENU] and then [UP] or [DOWN] repeatedly until the display shows ‘Stand Alone’ .
Conrm with [ENTER].
2. Press [UP] or [DOWN] to select the desired submenu or the desired value.
The following sub menus are available:
Menu level 2 Menu level 3 Function
‘CTC’ ‘OFF’ "Colour temperature control" function o
‘2700…5800 K’ Setting the colour temperature
‘WarmWhite’ ‘0…255’ Warm white LED brightness
‘ColdWhite’ ‘0…255’ Cold white LED brightness
‘Amber’ ‘0…255’ Amber LED brightness
‘Dimmer’ ‘0…255’ Dimmer intensity (0 % to 100 %)
‘Strobe’ ‘0…30Hz’ Strobe eect frequency from 0 to 30 Hz
Manual mode / stand-alone
operation
Operating
2bright Pint TW200 IP
31
LED PAR