User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Starting up
- 6 Connections and controls
- 7 Operating
- 7.1 Starting the device
- 7.2 Operating on the unit
- 7.3 Menu overview
- 7.4 Functions in 1-channel DMX mode
- 7.5 Functions in 2-channel DMX mode, variant A
- 7.6 Functions in 2-channel DMX mode, variant B
- 7.7 Functions in 3-channel DMX mode
- 7.8 Functions in 5-channel DMX mode, variant A
- 7.9 Functions in 5-channel DMX mode, variant B
- 7.10 Functions in 9-channel DMX mode
- 7.11 Colour temperature adjustment via DMX
- 8 Technical specifications
- 9 Plug and connection assignments
- 10 Troubleshooting
- 11 Cleaning
- 12 Protecting the environment
1. Press [MENU] and then [UP] or [DOWN] repeatedly until the display shows ‘DMX Address’ .
Conrm with [ENTER].
2. Use [UP] or [DOWN] to select the desired DMX address between ‘001’ and ‘512’ .
3. Press [ENTER] to accept the selection.
This setting is only relevant when the device is controlled via DMX. Make sure that this number
matches the conguration of your DMX controller. The following table shows the highest pos‐
sible DMX address for the various DMX modes.
Mode Display Highest possible DMX address
1-channel ‘1CH’ 512
2-channel, variant A ‘2CH A’ 511
2-channel, variant B ‘2CH B’ 511
3-channel ‘3CH’ 510
Setting the DMX address
Operating
2bright Pint TW200 IP
29
LED PAR