User manual

1. Press [MENU] and then [UP] or [DOWN] repeatedly until the display shows ‘Settings’ .
Conrm with [ENTER].
2. Press [UP] or [DOWN] repeatedly until the display shows ‘Calibration’ . Conrm with
[ENTER].
ð
You are prompted to enter a password.
3. Enter the password 50. Conrm with [ENTER].
4. Use [UP] or [DOWN] to select the value for the colour calibration. The following table
shows the available options.
Menu level 4 Menu level 5 Function
‘Red’ ‘000…255’ Calibration of red
‘Green’ ‘000…255’ Calibration of green
‘Blue’ ‘000…255’ Calibration of blue
‘White’ ‘000…255’ Calibration of white
5. Press [ENTER] to accept the selection.
Calibrating colours
Operating
2bright Pint FC150 IP
47
LED spotlight