User manual

1. Press [MENU] and then [UP] or [DOWN] repeatedly until the display shows ‘Settings’ .
Conrm with [ENTER].
2. Press [UP] or [DOWN] repeatedly until the display shows ‘PWM Rate’ . Conrm with
[ENTER].
3. Use [UP] or [DOWN] to select the value for the LED repetition rate. The following table
shows the available options.
Menu level 3 Function
‘900Hz’ PWM 900 Hz
‘1000Hz’ PWM 1.5 kHz
‘1100Hz’ PWM 1.1 kHz
‘1200Hz’ PWM 1.2 kHz
‘1300Hz’ PWM 1.3 kHz
‘1400Hz’ PWM 1.4 kHz
‘1500Hz’ PWM 1.5 kHz
LED repetition rate (PWM)
Operating
44
2bright Pint FC150 IP
LED spotlight