User manual

1. Press [MENU] and then [UP] or [DOWN] repeatedly until the display shows ‘Settings’ .
Conrm with [ENTER].
2. Press [UP] or [DOWN] repeatedly until the display shows ‘DMX Fail’ . Conrm with
[ENTER].
3. Use [UP] or [DOWN] to choose between ‘Hold’ , ‘Blackout’ , ‘ProgramMix’ and
‘ManualMode’ to make the setting to be used when the DMX controller fails.
The following sub menus are available:
Menu level 3 Function
‘Hold Last’ The last eect is being held.
‘Blackout’ The spotlight is turned o.
‘ProgamMix’ The automatic preprogrammed shows are played.
‘Manual’ The device is switched to manual operation.
4. Press [ENTER] to accept the selection.
Setting the behaviour on DMX
control failure
Operating
38
2bright Pint FC150 IP
LED spotlight