User manual

1. Press [MENU] and then [UP] or [DOWN] repeatedly until the display shows ‘Settings’ .
Conrm with [ENTER].
2. Press [UP] or [DOWN] repeatedly until the display shows ‘Display Backlight’ . Conrm with
[ENTER].
3. Use [UP] or [DOWN] to choose between ‘On’ (display permanently on) and ‘O’ (display
turns o after a few seconds in case of inactivity).
4. Press [ENTER] to accept the selection.
Setting display illumination
Operating
2bright Pint FC150 IP
37
LED spotlight