User manual

In this operating mode you select one of the preprogrammed automatic shows and congure
the speed and the dimmer intensity of the selected show.
1. Press [MENU] and then [UP] or [DOWN] repeatedly until the display shows ‘Stand Alone’ .
Conrm with [ENTER].
2. Press [UP] or [DOWN] repeatedly until the display shows ‘Auto’ . Conrm the selection
with [ENTER].
3. Use [UP] or [DOWN] to select the desired automatic show (display shows ‘Program 1’ …
‘Program 17’ ). In submenu ‘Program 17’ , programs 1 to 16 are played in random order.
Conrm with [ENTER].
4. Press [UP] or [DOWN] to select the desired submenu or the desired value.
The following sub menus are available:
Menu level 4 Menu level 5 Function
‘Dimmer’ ‘000…255’ Dimmer intensity
‘Speed’ ‘000…255’ Running speed from slow to fast
5. Press [ENTER] to accept the selection.
Selecting and conguring a pre‐
programmed automatic show
kongurieren
Operating
2bright Pint FC150 IP
31
LED spotlight