User manual

Mode Display Highest possible DMX address
8-channel ‘8CH’ 505
11-channel ‘11CH’ 502
1. Press [MENU] and then [UP] or [DOWN] repeatedly until the display shows ‘DMX Mode’ .
Conrm with [ENTER].
2. Use [UP] or [DOWN] to select the desired DMX mode (1, 2, 4, 6, 8, or 11 channels).
Depending on the selected mode, the display shows ‘1CH’ , ‘2CH’ , ‘4CH’ , ‘6CH’ , ‘8CH’ or
‘11CH’ .
3. Press [ENTER] to accept the selection.
This setting is only relevant when the device is controlled via DMX.
Setting the DMX mode
Operating
30
2bright Pint FC150 IP
LED spotlight