User manual

1. Press [MENU] and then [UP] or [DOWN] repeatedly until the display shows ‘DMX Address’ .

Conrm with [ENTER].

2. Use [UP] or [DOWN] to select the desired DMX address between ‘001’ and ‘512’ .

3. Press [ENTER] to accept the selection.

This setting is only relevant when the device is controlled via DMX. Make sure that this number

matches the conguration of your DMX controller. The following table shows the highest pos‐

sible DMX address for the various DMX modes.

Mode Display Highest possible DMX address

1-channel ‘1CH’ 512

2-channel ‘2CH’ 511

4-channel ‘4CH’ 509

6-channel ‘6CH’ 507

Setting the DMX address

Operating

2bright Pint FC150 IP

LED spotlight