User manual

1. Press [ENTER] and then [UP] or [DOWN] repeatedly until the display shows ‘DMX Mode’ .
Conrm with [ENTER].
2. Use [UP] or [DOWN] to select the desired DMX mode (2, 3, 6, 9, or 11 channels).
Depending on the selected mode, the display shows ‘2CH’ , ‘3CH’ , ‘6CH’ , ‘9CH’ or
‘11CH’ .
3. Press [ENTER] to accept the selection.
This setting is only relevant when the device is controlled via DMX.
Setting the DMX mode
Operating
26
2bright Par 7 IP
LED Spotlight