User manual

1. Press [ENTER] and then [UP] or [DOWN] repeatedly until the display shows ‘Settings’ .
Conrm with [ENTER].
2. Press [UP] or [DOWN] repeatedly until the display shows ‘Factory Reset’ .
ð
The display shows the message ‘Reset Now’ .
3. Conrm with [ENTER] to start the reset.
1. Press [ENTER] and then [UP] or [DOWN] repeatedly until the display shows ‘System Info’ .
Conrm with [ENTER].
2. Press [UP] or [DOWN] until the display shows ‘Firmware’ .
ð
The current rmware version is displayed.
1. Press [ENTER] and then [UP] or [DOWN] repeatedly until the display shows ‘System Info’ .
Conrm with [ENTER].
2. Press [UP] or [DOWN] until the display shows ‘Operation Hours’ . Conrm the selection
with [ENTER].
ð
The operation hours of the device are displayed.
Resetting the device to factory
defaults
Firmware version display
Operating hours display
Operating
2bright Par 420 IP 2bright Par 720 IP
41
LED Spotlight