User manual

1. Press [ENTER] and then [UP] or [DOWN] repeatedly until the display shows ‘Settings’ .
Conrm with [ENTER].
2. Press [UP] or [DOWN] repeatedly until the display shows ‘AutoLock’ . Conrm with
[ENTER].
3. Use [UP] or [DOWN] to select either ‘On’ (keylock on) and O (keylock ‘O’ ).
4. Press [ENTER] to accept the selection.
1. Press [ENTER] and then [UP] or [DOWN] repeatedly until the display shows ‘Settings’ .
Conrm with [ENTER].
2. Press [UP] or [DOWN] repeatedly until the display shows ‘IR Remote’ . Conrm with
[ENTER].
3. Use [UP] or [DOWN] to select either ‘On’ (RC enabled) and ‘O’ (RC disabled).
4. Press [ENTER] to accept the selection.
Enabling keylock
Enabling the Infrared sensor for
remote control
Operating
40
2bright Par 420 IP 2bright Par 720 IP
LED Spotlight