User manual

1. Press [ENTER] and then [UP] or [DOWN] repeatedly until the display shows ‘Settings’ .
Conrm with [ENTER].
2. Press [UP] or [DOWN] repeatedly until the display shows ‘Display Reverse’ . Conrm with
[ENTER].
3. Use [UP] or [DOWN] to select either ‘On’ (display rotated by 180 °) or ‘O’ (display not
rotated).
4. Press [ENTER] to accept the selection.
1. Press [ENTER] and then [UP] or [DOWN] repeatedly until the display shows ‘Settings’ .
Conrm with [ENTER].
2. Press [UP] or [DOWN] repeatedly until the display shows ‘Display Backlight’ . Conrm with
[ENTER].
3. Use [UP] or [DOWN] to select either ‘On’ (display permanently on) or ‘O’ (display turns
o after a few seconds in case of inactivity).
4. Press [ENTER] to accept the selection.
Rotating the Display
Setting display illumination
Operating
36
2bright Par 420 IP 2bright Par 720 IP
LED Spotlight