User Manual 2bright Par 420 IP 2bright Par 720 IP LED Spotlight
Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 Internet: www.thomann.de 13.07.
Table of contents Table of contents 1 General information................................................................................................................................. 1.1 Further information........................................................................................................................... 1.2 Notational conventions.................................................................................................................... 1.3 Symbols and signal words.....
Table of contents 4 9 Plug and connection assignments.................................................................................................. 58 10 Troubleshooting...................................................................................................................................... 59 11 Cleaning.......................................................................................................................................................
General information 1 General information This user manual contains important information on the safe operation of the device. Read and follow all safety notes and all instructions. Save this manual for future reference. Make sure that it is available to all persons using this device. If you sell the device to another user, be sure that they also receive this manual. Our products and user manuals are subject to a process of continuous development.
General information 1.1 Further information On our website (www.thomann.de) you will find lots of further information and details on the following points: Download This manual is also available as PDF file for you to download. Keyword search Use the search function in the electronic version to find the topics of interest for you quickly. Online guides Our online guides provide detailed information on technical basics and terms.
General information Letterings The letterings for connectors and controls are marked by square brackets and italics. Examples: [VOLUME] control, [Mono] button. Displays Texts and values displayed on the device are marked by quotation marks and italics. Examples: ‘24ch’ , ‘OFF’ . Instructions The individual steps of an instruction are numbered consecutively. The result of a step is indented and highlighted by an arrow. Example: 1. Switch on the device. 2. Press [Auto].
General information Signal word Meaning DANGER! This combination of symbol and signal word indicates an immediate dangerous situation that will result in death or serious injury if it is not avoided. WARNING! This combination of symbol and signal word indicates a pos‐ sible dangerous situation that can result in death or serious injury if it is not avoided.
General information Warning signs Type of danger Warning – suspended load. Warning – danger zone.
Safety instructions 2 Safety instructions Intended use This device is intended for use as an electronic lighting effect by means of LED technology. The device is designed for professional use only and is not suitable for use in households. Use the device only as described in this user manual. Any other use or use under other operating con‐ ditions is considered to be improper and may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use.
Safety instructions DANGER! Electric shock caused by short-circuit Always use proper ready-made insulated mains cabling (power cord). Do not modify the mains cable. Failure to do so could result in electric shock/death or fire. If in doubt, seek advice from a registered electrician. DANGER! Electric shock caused by high voltages inside Within the device there are areas where high voltages may be present. Never remove any covers. There are no user-serviceable parts inside.
Safety instructions NOTICE! Power supply Before connecting the device, ensure that the input voltage (AC outlet) matches the voltage rating of the device and that the AC outlet is protected by a residual current circuit breaker. Failure to do so could result in damage to the device and possibly injure the user. Unplug the device before electrical storms occur and when it is unused for long periods of time to reduce the risk of electric shock or fire.
Features 3 Features The fanless spotlight is suitable for demanding outdoor use as well as for TV and theatre.
Features Information about protection class IP65 Equipment with protection class IP65 are dust-tight and completely protected against contact (first code number). They are also protected against splash water from any angle (second code digit). That is why this equipment can also be used outdoors. Event technology equipment is generally only designed for temporary use however (event lighting) and not for permanent use outdoors.
Installation 4 Installation Unpack and check carefully there is no transportation damage before using the unit. Keep the equipment packaging. To fully protect the product against vibration, dust and moisture during transportation or storage use the original packaging or your own packaging material suitable for transport or storage, respectively. WARNING! Risk of injury caused by falling objects Make sure that the installation complies with the standards and rules that apply in your country.
Installation NOTICE! Use of stands When mounting the device onto a stand, ensure that the stand is in a safe and stable position and that the weight of the device does not exceed the maximum permissible load capacity of the stand. NOTICE! Possible data transmission errors For error-free operation make use of dedicated DMX cables and do not use ordi‐ nary microphone cables. Never connect the DMX input or output to audio devices such as mixers or ampli‐ fiers.
Installation Mounting options You can install the unit in hanging or standing position. When in use, the device must always be attached to a solid surface or an approved truss. Use the openings of the bracket provided for mounting. Always work from a stable platform whenever installing, moving or servicing the unit. In doing so, the area underneath the unit must be cordoned off. The safety rope must be attached to the safety rope eyelet on the back of the device.
Starting up 5 Starting up Create all connections while the device is off. Use the shortest possible high-quality cables for all connections. Take care when running the cables to prevent tripping hazards. Connections in DMX mode 18 Connect the DMX input of the device to the DMX output of a DMX controller or another DMX device. Connect the output of the first DMX device to the input of the second one, and so on to form a daisy chain.
Starting up Connections in master/slave mode When you configure a group of devices in master/slave mode, the first unit will control the other units for an automatic, sound-activated, synchronized show. This function is ideal when you want to start a show immediately. Connect the DMX output of the master device to the DMX input of the first slave device. Then connect the DMX output of the first slave device to the DMX input of the second slave device and so on.
Starting up NOTICE! Risk of fire due to incorrect polarity Incorrectly inserted batteries may destroy the device or the batteries. Ensure that proper polarity is observed when inserting batteries. NOTICE! Possible damage by leaking batteries Leaking batteries can cause permanent damage to the device. Take batteries out of the device if it is not going to be used for a longer period.
Connections and controls 6 Connections and controls 2bright Par 420 IP (Item no.
Connections and controls 1 Bracket for floor placement or hanging 2 [DMX OUT] | DMX output, designed as a 3-pin XLR panel socket (IP65) 3 [DMX IN] | DMX input, designed as a 3-pin XLR panel plug (IP65) 4 Locking screws for the brackets. 5 Display and keypad [MENU] | Activates the main menu, switches between the menu levels or closes a submenu. [DOWN] | Decreases the displayed value by one. [UP] | Increases the displayed value by one. [ENTER] | Opens a submenu or confirms a value.
Connections and controls 2bright Par 720 IP (Item no.
Connections and controls 1 Bracket for floor placement or hanging 2 Pressure compensation element 3 [DMX OUT] | DMX output, designed as a 3-pin XLR panel socket (IP65) 4 Locking screws for the brackets. 5 [DMX IN] | DMX input, designed as a 3-pin XLR panel plug (IP65) 6 Display and keypad [MENU] | Activates the main menu, switches between the menu levels or closes a submenu. [DOWN] | Decreases the displayed value by one. [UP] | Increases the displayed value by one.
Connections and controls Remote control ö % 1 [+], [–] | Changes the auto or fade programmes, increases or decreases the strobe speed.
Operating 7 Operating 7.1 Starting the device Connect the device to the power supply to start operation. The LED lights. The device is imme‐ diately operational. 7.2 Operating on the unit Navigating in the menu 1. Press [ENTER] to activate the main menu. 2. Press again [UP] or [DOWN] to call up further menu items. 3. To activate the respectively shown menu item, press [ENTER]. 4. Press [UP] or [DOWN] to change the respectively displayed value. 5. Press [ENTER] to apply the displayed value. 6.
Operating Setting the DMX address 1. Press [ENTER] and then [UP] or [DOWN] repeatedly until the display shows ‘DMX Address’ . Confirm with [ENTER]. 2. Use [UP] or [DOWN] to select the desired DMX address between ‘001’ and ‘512’ . 3. Press [ENTER] to accept the selection. This setting is only relevant when the device is controlled via DMX. Make sure that this number matches the configuration of your DMX controller. The following table shows the highest pos‐ sible DMX address for the various DMX modes.
Operating Setting the DMX mode 1. Press [ENTER] and then [UP] or [DOWN] repeatedly until the display shows ‘DMX Mode’ . Confirm with [ENTER]. 2. Use [UP] or [DOWN] to select the desired DMX mode (2, 3, 6, 9 or 11 channels). Depending on the selected mode, the display shows ‘2CH’ , ‘3CH’ , ‘6CH’ , ‘9CH’ or ‘11CH’ . 3. Press [ENTER] to accept the selection. This setting is only relevant when the device is controlled via DMX.
Operating Selecting and configuring auto‐ matic programmes In this operating mode you select one of the automatic programmes and configure the speed and the dimmer intensity of the automatic programme. 1. Press [ENTER] and then [UP] or [DOWN] repeatedly until the display shows ‘Stand Alone’ . Confirm with [ENTER]. 2. Press [UP] or [DOWN] repeatedly until the display shows ‘Auto’ . Confirm the selection with [ENTER]. 3.
Operating Enabling sound-control In this mode, the unit follows the rhythm of the background music or sounds detected by the built-in microphone. 1. Press [ENTER] and then [UP] or [DOWN] repeatedly until the display shows ‘Stand Alone’ . Confirm with [ENTER]. 2. Press [UP] or [DOWN] repeatedly until the display shows ‘Sound’ . Confirm with [ENTER]. 3. Press [UP] or [DOWN] to select the desired value for the microphone sensitivity (display shows ‘Mic Sens 00’ … ‘Mic Sens 99’ ). 4.
Operating Setting colour macro 1. Press [ENTER] and then [UP] or [DOWN] repeatedly until the display shows ‘Stand Alone’ . Confirm with [ENTER]. 2. Press [UP] or [DOWN] repeatedly until the display shows ‘Color Macro’ . Confirm with [ENTER]. 3. Use [UP] or [DOWN] to select one of the 35 colour macros (display shows ‘Color1’ … ‘Color35’ ) or turn off the colour (display shows ‘Color Off’ ). Confirm with [ENTER]. 4.
Operating Setting constant colour 32 1. Press [ENTER] and then [UP] or [DOWN] repeatedly until the display shows ‘Stand Alone’ . Confirm with [ENTER]. 2. Press [UP] or [DOWN] repeatedly until the display shows ‘Static’ . Confirm with [ENTER]. 3. Use [UP] or [DOWN] to select an effect or a colour that you can to adjust individually. 4. Press [ENTER] to activate a desired sub menu. 5.
Operating Display Meaning ‘Amber’ Amber from 0 to 255 ‘Cyan’ Cyan from 0 to 255 Setting colour temperature and dimmer for white 1. Press [ENTER] and then [UP] or [DOWN] repeatedly until the display shows ‘Stand Alone’ . Confirm with [ENTER]. 2. Press [UP] or [DOWN] until the display shows ‘Tunable White’ . Confirm with [ENTER]. 3. Press [UP] or [DOWN] to select the desired submenu or the desired value. The following sub menus are available: 4.
Operating Setting an individual mixed colour 1. Press [ENTER] and then [UP] or [DOWN] repeatedly until the display shows ‘Stand Alone’ . Confirm with [ENTER]. 2. Press [UP] or [DOWN] repeatedly until the display shows ‘User Color’ . Confirm with [ENTER]. 3. Use [UP] or [DOWN] to select one of 8 memory slots for an individual mixed colour (dis‐ play shows ‘Color1’ … ‘Color8’ ). Confirm with [ENTER]. 4. Press [UP] or [DOWN] to select the desired submenu or the desired value.
Operating 5. Press [ENTER] to accept the selection. 1. Press [ENTER] and then [UP] or [DOWN] repeatedly until the display shows ‘Slave’ . Con‐ firm with [ENTER]. 2. Use [UP] or [DOWN] to select the menu item ‘Yes’ . Confirm with [ENTER]. Activating Slave mode ð The device is now working in slave mode, i.e. it will exactly copy the movement of the controlling master device, correct wiring provided. 3. To deactivate slave mode, select ‘No’ . Confirm with [ENTER].
Operating Rotating the Display 1. Press [ENTER] and then [UP] or [DOWN] repeatedly until the display shows ‘Settings’ . Confirm with [ENTER]. 2. Press [UP] or [DOWN] repeatedly until the display shows ‘Display Reverse’ . Confirm with [ENTER]. 3. Use [UP] or [DOWN] to select either ‘On’ (display rotated by 180 °) or ‘Off’ (display not rotated). 4. Press [ENTER] to accept the selection. 1. Press [ENTER] and then [UP] or [DOWN] repeatedly until the display shows ‘Settings’ . Confirm with [ENTER]. 2.
Operating Setting the behaviour on DMX control failure 1. Press [ENTER] and then [UP] or [DOWN] repeatedly until the display shows ‘Settings’ . Confirm with [ENTER]. 2. Press [UP] or [DOWN] repeatedly until the display shows ‘DMX Fail’ . Confirm with [ENTER]. 3. Use [UP] or [DOWN] to select either ‘Hold’ , ‘Blackout’ and ‘Emergency Light’ to make the setting to be used when the DMX controller fails. 4. Press [ENTER] to accept the selection. Display Meaning ‘Hold’ Last DMX value is being held.
Operating Setting the dimmer curve 1. Press [ENTER] and then [UP] or [DOWN] repeatedly until the display shows ‘Settings’ . Confirm with [ENTER]. 2. Press [UP] or [DOWN] repeatedly until the display shows ‘Dimmer Curve’ . Confirm with [ENTER]. 3. Use [UP] or [DOWN] to select the desired dimmer curve (display shows ‘Linear’ , ‘Exponential’ , ‘Logarithmic’ or ‘S-Curve’ ). 4. Press [ENTER] to accept the selection.
Operating Setting the response behaviour of the dimmer 1. Press [ENTER] and then [UP] or [DOWN] repeatedly until the display shows ‘Settings’ . Confirm with [ENTER]. 2. Press [UP] or [DOWN] repeatedly until the display shows ‘DimmerResponse’ . Confirm with [ENTER]. 3. Use [UP] or [DOWN] to select the desired response behaviour of the dimmer (display shows ‘LED’ or ‘Halogen’ ). 4. Press [ENTER] to accept the selection. Display Meaning ‘LED’ The dimmer setting for LED is activated.
Operating Enabling keylock 1. Press [ENTER] and then [UP] or [DOWN] repeatedly until the display shows ‘Settings’ . Confirm with [ENTER]. 2. Press [UP] or [DOWN] repeatedly until the display shows ‘AutoLock’ . Confirm with [ENTER]. 3. Use [UP] or [DOWN] to select either ‘On’ (keylock on) and Off (keylock ‘Off’ ). 4. Press [ENTER] to accept the selection. 1. Press [ENTER] and then [UP] or [DOWN] repeatedly until the display shows ‘Settings’ . Confirm with [ENTER]. 2.
Operating Resetting the device to factory defaults 1. Press [ENTER] and then [UP] or [DOWN] repeatedly until the display shows ‘Settings’ . Confirm with [ENTER]. 2. Press [UP] or [DOWN] repeatedly until the display shows ‘Factory Reset’ . ð The display shows the message ‘Reset Now’ . 3. Confirm with [ENTER] to start the reset. 1. Press [ENTER] and then [UP] or [DOWN] repeatedly until the display shows ‘System Info’ . Confirm with [ENTER]. 2.
Operating Showing information about con‐ nected devices (Remote Device Management) 1. Press [ENTER] and then [UP] or [DOWN] repeatedly until the display shows ‘System Info’ . Confirm with [ENTER]. 2. Press [UP] or [DOWN] until the display shows ‘RDM’ . Confirm the selection with [ENTER]. ð The information of the connected devices is displayed.
Operating 7.3 Menu overview DMX Address DMX Mode 001...512 Stand Alone 2CH Slave Settings Auto Yes/No 3CH Program 1 6CH Program 2 9CH Program 3 Dim Speed 000...255 000...255 V1.0 xxxHrs RDM xxxxH Full Program 16 Sound Firmware Operation Hours Standard Tunable White 11CH System Info Output Set 00...99 Dimmer 000...255 CTC 2700 K Display Reverse On/Off Display Backlight On/Off DMX Fail Hold Color Macro Blackout 7500 K Color Off Color1 Emergency Light 001...
Operating 7.4 Functions in 2-channel DMX mode Channel Value Function 1 000…255 Dimmer intensity from dark (0) to bright (255) 2 000…255 Colour temperature white light from 2700 K to 7500 K 7.
Operating Channel 3 Value Function 103…127 Strobe impulses (interval 5 s to 1 s) 128…250 Strobe effect, increasing speed (1 … 20 Hz) 251…255 LEDs on Colour macros 000…010 Blackout 011…013 Colour 1 014…016 Colour 2 017…019 Colour 3 … 111…115 Colour 33 116…120 Colour 34 121…125 Colour 35 126…127 Colour change stop 128…191 Colour change colour 1…12, increasing speed 192…255 Slow colour change with dissolve colour 1…12, increasing speed 2bright Par 420 IP 2bright Par 720 IP LED Sp
Operating 7.
Operating 7.
Operating Channel Value Function 6 000…255 Intensity lime (0 %…100 %) 7 000…255 Intensity amber (0 %…100 %) 8 000…255 Intensity cyan (0 %…100 %) 9 Colour macros 000…010 Blackout 011…013 Colour 1 014…016 Colour 2 017…019 Colour 3 … 48 111…115 Colour 33 116…120 Colour 34 121…125 Colour 35 126…127 Colour change stop 128…191 Colour change colour 1…12, increasing speed 192…255 Slow colour change with dissolve colour 1…12, increasing speed 2bright Par 420 IP 2bright Par 720 IP
Operating 7.
Operating Channel Value Function 6 000…255 Intensity lime (0 %…100 %) 7 000…255 Intensity amber (0 %…100 %) 8 000…255 Intensity cyan (0 %…100 %) 9 Colour macros 000…010 Blackout 011…013 Colour 1 014…016 Colour 2 017…019 Colour 3 … 10 50 111…115 Colour 33 116…120 Colour 34 121…125 Colour 35 126…127 Colour change stop 128…191 Colour change colour 1…12, increasing speed 192…255 Slow colour change with dissolve colour 1…12, increasing speed Colour temperature white light sel
Operating Channel 11 Value Function 000…005 No function 006…025 2700 K 026…045 2900 K 046…065 3100 K 066…075 3400 K 076…095 3700 K 096…111 4000 K 112…131 4400 K 132…151 5000 K 152…171 5400 K 172…191 5800 K 192…211 6400 K 212…231 7000 K 232…255 7500 K Dimmer curve 000…005 No function 2bright Par 420 IP 2bright Par 720 IP LED Spotlight 51
Operating Channel 52 Value Function 006…063 Linear course 064…127 Exponential course 128…191 Logarithmic course 192…255 S-curve shaped course 2bright Par 420 IP 2bright Par 720 IP LED Spotlight
Technical specifications 8 Technical specifications 2bright Par 420 IP (Item no. 545990) 266 mm Item no.
Technical specifications Item no. DMX control Power consumption 80 W Operating supply voltage 100 - 240 V Battery for the remote control Lithium button cell, 3 V, CR 2025 Battery type 50/60 Hz Protection class IP65 Mounting options hanging, standing Dimensions (W × H × D), with bracket 266 mm × 238 mm × 138 mm Weight 3.
Technical specifications 2bright Par 720 IP (Item no. 545991) 290 mm Item no.
Technical specifications Item no. Power consumption 140 W Operating supply voltage 100 - 240 V Battery for the remote control Lithium button cell, 3 V, CR 2025 Protection class IP65 Mounting options hanging, standing Dimensions (W × H × D), with bracket 290 mm × 305 mm × 137 mm Weight 5.
Technical specifications Further information Item no.
Plug and connection assignments 9 Plug and connection assignments Introduction This chapter will help you select the right cables and plugs to connect your valuable equip‐ ment so that a perfect light experience is guaranteed.
Troubleshooting 10 Troubleshooting NOTICE! Possible data transmission errors For error-free operation make use of dedicated DMX cables and do not use ordi‐ nary microphone cables. Never connect the DMX input or output to audio devices such as mixers or ampli‐ fiers. In the following we list a few common problems that may occur during operation.
Troubleshooting Symptom Remedy The unit does not work, no light. Check the mains connection and the fuse. No response to the DMX con‐ troller. 1. Check the DMX ports and cables for proper connection. 2. Check the address settings and the DMX polarity. 3. Try using another DMX controller. 4. Check to see if the DMX cables run near or alongside to high voltage cables that may cause damage or interfer‐ ence to DMX interface circuits.
Cleaning 11 Cleaning Optical lenses Clean the optical lenses, that are accessible from the outside, regularly in order to optimize the light output. The frequency of cleaning depends on the operating environment: wet, smoky or particularly dirty surroundings can cause more accumulation of dirt on the optics of the device. n Clean with a soft cloth using our lamp and lens cleaner (item no. 280122). n Always dry the parts carefully.
Protecting the environment 12 Protecting the environment Disposal of the packaging mate‐ rial For the packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the notes and markings on the packaging.
Protecting the environment Disposal of your old device This product is subject to the European Waste Electrical and Electronic Equipment Directive (WEEE) in its currently valid version. Do not dispose with your normal household waste. Dispose of this device through an approved waste disposal firm or through your local waste facility. When discarding the device, comply with the rules and regulations that apply in your country. If in doubt, consult your local waste disposal facility.
Notes 64 2bright Par 420 IP 2bright Par 720 IP LED Spotlight
Notes 2bright Par 420 IP 2bright Par 720 IP LED Spotlight 65
Notes 66 2bright Par 420 IP 2bright Par 720 IP LED Spotlight
Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.
