User manual

1. Press [ENTER] and then [UP] or [DOWN] repeatedly until the display shows ‘Settings’ .
Conrm with [ENTER].
2. Press [UP] or [DOWN] repeatedly until the display shows ‘Dimmer Response’ . Conrm
with [ENTER].
3. Use [UP] or [DOWN] to select the desired response behaviour of the dimmer (display
shows ‘LED’ or ‘Halogen’ ).
4. Press [ENTER] to accept the selection.
Display Meaning
‘LED’ The dimmer setting for LED is activated.
‘Halogen’ The imitation of the dimming behaviour for halogen
light is activated.
Setting the dimmer response
Operating
2bright Par 18 IP
39
LED Spotlight