User manual

1. Press [ENTER] and then [UP] or [DOWN] repeatedly until the display shows ‘Settings’ .
Conrm with [ENTER].
2. Press [UP] or [DOWN] repeatedly until the display shows ‘Dimmer Curve’ . Conrm with
[ENTER].
3. Use [UP] or [DOWN] to select the desired dimmer curve (display shows ‘Linear’ ,
‘Exponential’ , ‘Logarithmic’ or ‘S-Curve’ ).
4. Press [ENTER] to accept the selection.
Display Meaning
‘Linear’ Linear course
‘Exponential’ Exponential course
(Square curve with a at course at the beginning and a
steep course at the end)
‘Logarithmic’ Logarithmic course
(Inverted quadratic curve with a steep course at the
beginning and a at course at the end)
‘S Curve’ S-curve shaped course
(Non-linear curve with a distinctive at course at the
beginning and end)
Setting the dimmer curve
Operating
38
2bright Par 18 IP
LED Spotlight