User manual

In this mode, the unit follows the rhythm of the background music or sounds detected by the
built-in microphone.
1. Press [ENTER] and then [UP] or [DOWN] repeatedly until the display shows ‘Stand Alone’ .
Conrm with [ENTER].
2. Press [UP] or [DOWN] repeatedly until the display shows ‘Sound’ . Conrm with [ENTER].
3. Press [UP] or [DOWN] to select the desired value for the microphone sensitivity (display
shows ‘000’ … ‘100’ ).
4. Press [ENTER] to accept the selection.
ð
The sound control is activated.
The music control may be restricted due to the closed design of the device.
Enabling sound-control
Operating
30
2bright Par 18 IP
LED Spotlight