User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Starting up
- 6 Connections and controls
- 7 Operating
- 7.1 Starting the device
- 7.2 Operating on the unit
- 7.3 Menu overview
- 7.4 Functions in 1-channel DMX mode
- 7.5 Functions in 3-channel DMX mode
- 7.6 Functions in 4-channel DMX mode 1
- 7.7 Functions in 4-channel DMX mode 2
- 7.8 Functions in 6-channel DMX mode
- 7.9 Functions in 8-channel DMX mode
- 7.10 Functions in 10-channel DMX mode
- 7.11 Functions in 12-channel DMX mode
- 8 Technical specifications
- 9 Plug and connection assignment
- 10 Cleaning
- 11 Protecting the environment
1. Press [MENU] repeatedly until the display shows ‘TUAN’ . Conrm with [ENTER].
2. Press [UP] or [DOWN] to select the desired submenu or the desired value.
The following sub menus are available:
Menu level 2 Menu level 3 Description
‘DIM’ ‘000…255’ Dimmer intensity from 0 to 255
‘CTC’ ‘OFF, 2800K…8000K’ Colour temperature: 2800 K, 3500 K,
4000 K, 5000 K, 6000 K, 7000 K,
7500 K and 8000 K
3. Press [ENTER] to accept the selection.
In this menu, you can specify whether the device is operating in slave mode.
1. Press [MENU] repeatedly until the display shows ‘SLAV’ . Conrm with [ENTER].
2. Use [UP] or [DOWN] to select the menu item ‘Yes’ . Conrm with [ENTER].
ð
The device is now working in slave mode, i.e. it will exactly copy the movement of
the controlling master device, correct wiring provided.
3. To deactivate slave mode, select ‘No’ . Conrm with [ENTER].
This setting is only relevant if the device is not controlled via DMX.
Setting colour temperature and
dimmer for white
Activating Slave mode
Operating
28
2bright Blind FC LED IP
Blinder