User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Starting up
- 6 Connections and controls
- 7 Operating
- 7.1 Starting the device
- 7.2 Operating on the unit
- 7.3 Menu overview
- 7.4 Functions in 1-channel DMX mode
- 7.5 Functions in 3-channel DMX mode
- 7.6 Functions in 4-channel DMX mode 1
- 7.7 Functions in 4-channel DMX mode 2
- 7.8 Functions in 6-channel DMX mode
- 7.9 Functions in 8-channel DMX mode
- 7.10 Functions in 10-channel DMX mode
- 7.11 Functions in 12-channel DMX mode
- 8 Technical specifications
- 9 Plug and connection assignment
- 10 Cleaning
- 11 Protecting the environment
1. Press [MENU] repeatedly until the display shows ‘ADDR’ . Conrm with [ENTER].
2. Use [UP] or [DOWN] to select the desired DMX address between ‘001’ and ‘512’ .
3. Press [ENTER] to accept the selection.
This setting is only relevant when the device is controlled via DMX. Make sure that this
number matches the conguration of your DMX controller. The following table shows
the highest possible DMX address for the various DMX modes.
Mode Display Highest possible DMX address
1-channel ‘1CH’ 512
3-channel ‘3CH’ 510
4-channel ‘4CH1’ 509
4-channel ‘4CH2’ 509
6-channel ‘6CH’ 507
8-channel ‘8CH’ 505
10-channel ‘10CH’ 503
12-channel ‘12CH’ 501
Setting the DMX address
Operating
24
2bright Blind FC LED IP
Blinder