User Manual

5. Maintenance
Cleaning and care
Always
dry your bike with a soft cloth to avoid rust and corrosion. While carefully drying your entire bike, you will also be
able to inspect all the different parts and detect any potential problems.
Lubrication is an important part of maintaining an electric vehicle. Parts of the bike - including the chain, derailleur, and
suspension fork - should be scrubbed with an appropriate lubricating oil
every six months.
Check the chain tension after every ride. The chain needs to be as tight as possible without creating friction that will waste
energy and wear the chain and cogs prematurely.
Ensure the electrical components, like the LCD display, motor, battery, and the circuit wiring have no prolonged water contact. Do
not submerge this e-bike in any body of water. If wiring is causing the e-bike to spark, please refrain from riding, kill the electrical
current and contact us to replace the electrical system. If the system is faulty or becomes faulty without outside tampering or
changes to the e-bike, you are under a 6-month warranty for electrical systems issues.
Service and repair
WARNING: Replace worn parts!
As with all mechanical components, the bicycle is subjected to wear and high stresses. Different materials and
components may react to wear or stress fatigue in different ways. If the design life of a component has been
exceeded, it may suddenly fail, possibly causing injuries to the rider. Any form of crack, scratch or change of
colouring in highly stressed areas indicates that the life of the component has been reached and it should be
replaced.