User Manual

4. Operation
Control Panel
The bike’s control panel, located on the left side of the handlebar, allows you to turn on the bike for electric power, and adjust
your speed.
Operation
Press and hold M for several seconds to toggle the power on or off to both the display and controller. While the power is off, the
display will no longer consume power with a leakage current is less than 1uA.
The bike will be shut down automatically if it is left idle for 10 minutes.
Selecting Mode: (Speed/Trip/ODO)
On the display, the default mode is current speed. Pressing
M will cycle through the other modes in the order of current speed →
Single trip → ODO. If the current speed
is over 0 km/h, after 2 seconds the mode will return to Current speed.
Toggle Headlight
Press and hold
U for short time to toggle on/off the headlight.
Push Assistance 6km/h
Press and hold
DOWN to enable the push assistance mode. The motor will cause the bike to travel at 6km/h.