User Manual
ESC01– KIDS SCOOTER
6
INTRODUCTION
1. Before each use, inspect all nuts and bolts to ensure they
are tight. Follow the safety instructions outlined in this
document.
2. Hold the handle with both hands and gently push it
forward. When you hear a “beep”, the power of scooter
is turned on.
3. The buzzer emits a “beep” sound, the specic meaning
is as follows:
a. When the scooter is stationary, push it gently and
“beep” to indicate that the power is on.
b. In order for the motor to take over, the user must
be manually powering the movement, be standing
on the foot button and be travelling ~5km/h.
The scooter will not move under its own power
from a standing start.
4. Hold the handle with both hands, put one foot on the
foot switch, and the other foot pedal back to accelerate.
When you hear the “beep” sound, you can put the other
foot on the pedal.
5. If you need to slow down, please use one foot to step on
the rear wheel brake.