Operation Manual

98
6. Remove the bottom hinge and unscrew the left levelling foot.
(Fig. 6)
7. Screw the bottom hinge back on the left side. Use the pre-
drilled holes marked L (Fig.7). Next screw the levelling foot back
on the right side. Stand the appliance back up again.
8. Position the bushings and top covers from the right hand side on
the left (Fig. 8). Remove the bottom right bushing and fit it on
the left. (Fig. 8)
9. Refit the door, following the same steps as at point 4. Screw
down the left and right hinges (Fig. 9). Refit the top panel as
described at points 2 and 1.
Fig. 6
Fig. 7
Fig. 8
Fig. 9
60202004GB.fm Page 98 Wednesday, March 22, 2006 4:58 PM