Quick Start Guide
GB AWP 096 PROGRAMME CHART
❉
: optional / Yes : dosing required
1)
For improved garment care, spin speed is restricted to 400 rpm in this programme.
5019 501 10100
Programme
Care
Labels
Type of wash/Notes
- for temperature selection, respect the manufacturer’s recommendations on the care label
Max
Load
kg
Detergents and additives Special options
Spin
Speed
rpm
Pre-
wash
Main
Wash
Softener Half
load
No
spin
Cotton with prewash
95 °C
Heavily soiled, long wearing and temperature stable textiles in cotton and linen (bed linen, table linen,
underwear, shirts etc.).
5.0 Yes Yes
❉❉❉
600
Cotton
40 - 60 - 95 °C
Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and
linen.
5.0 — Yes
❉❉❉
600
Synthetics with prewash
60 °C
Heavily soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (Perlon,
Nylon) or blends with cotton.
2.5 Yes Yes
❉❉❉
600
Synthetics
30 - 40 - 60 °C
Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (Perlon,
Nylon) or blends with cotton.
2.5 — Yes
❉❉❉
600
Delicates
30 °C
Curtains and delicate clothing, dresses skirts, shirts and blouses.
1.5 — Yes
❉
—
❉
600
Quick wash
30 °C
Shortly worn outer clothing made of cotton, polyester, polyamide and blends with cotton.
3.0 — Yes
❉
—
❉
600
Wool
Cold - 40 °C
Only woollens with a felt-free finish, labelled with the woolmark and identified as machine washable.
1.0 — Yes
❉
—
❉
600
Handwash
30 - 40 °C
Textiles made of linen, silk, wool and viscose marked as “handwashable”.
1.0 — Yes
❉
—
❉
400
1)
Rinse & Spin —
Same as the last rinse and the final spin in the “Cotton” programme.
5.0 — —
❉❉❉
600
Spin —
In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme.
5.0 — — — —
❉
600
Gentle Spin —
In this programme spinning is gentle. Same as the spin cycle in the “Wool” programme.
1.0 — — — —
❉
600
Drain —
Water is drained only without any spinning.
——— — —— —
A. Water tap closed” indication
This washing machine is equipped with
automatic safety functions which
detect and diagnose faults at an early
stage and react appropriately, e.g.:
B. “Clean pump” indication
C. Programme selector
D. “Start/Pause” button
E. Programme sequence indicator
F. “Reset” button
E
F
D
C
B
A


