Operation Manual

20
Before contacting After Sales Service:
1. Try to solve the problem (see
“Troubleshooting Guide”).
2. Turn off the appliance and restart it to see
if the fault is repeated.
If after the above checks the fault still occurs,
get in touch with the nearest After Sales
Service.
Please give:
• a short description of the fault,
• the exact type and model,
• the service number (number after the word
Service on the rating plate) is located on the
right hand edge of the oven cavity (visible
when the oven door is open). The service
numbers are also indicated on the guarantee
booklet,
• your complete address and phone number.
If any repairs are required, please contact an
authorised After Sales Service as indicated in
the warranty.
In the unlikely event that an operation or repair is
carried out by an unauthorised technician,
always request a certification of the job carried
out and insist on the use of original spare parts.
Failure to comply with these instructions
may compromise the safety and quality of the
product.
.
• These appliances are designed to come into
contact with foodstuffs and they are
constructed in compliance with
Directive 89/109/EEC.
• The appliances are designed solely for use
as cooking appliances. Any other use of the
appliances (e.g. for room heating) is
considered as improper use and potentially
dangerous.
• The appliances are designed, built and sold
in compliance with:
- The safety requirements of “Low Voltage”
Directive 73/23/EEC.
- The protection requirements of
EMC Directive 89/336/EEC.
- The requirement of Directive 93/68/EEC.
AFTER-SALES SERVICE
DECLARATION OF CONFORMITY CE
53844-gb.fm5 Page 20 Wednesday, March 14, 2001 4:11 PM