Operation Manual

14
• Warning: Do not connect to the power
supply before you have finished
connecting the oven.
• Make sure the oven is installed and
connected to the electricity supply by a
qualified technician in accordance with
the manufacturer’s instructions and in
compliance with local regulations.
• The installer is responsible for the correct
electrical connection of the oven and the
observance of the relative safety
regulations.
• The oven must be connected to the
electricity supply by means of an all-pole
disconnect switch with minimum contact
gap of 3 mm.
• The oven must be earthed by-law.
• Do not use multiple plug adapters or
extension leads.
• After the oven has been installed, the
electrical components must be
inaccessible.
• Make sure that the voltage shown on the
rating plate is the same as the power
supply voltage in your home. The rating
plate is on the front edge of the oven
cavity (visible with oven door open).
ELECTRICAL CONNECTION
53844-gb.fm5 Page 14 Wednesday, March 14, 2001 4:11 PM