Quick Start Guide

1. After loading the dishwasher, close the
door properly and open the water
supply tap.
2. The dishwasher switches on
automatically as soon as the programme
selector knob is turned.
The power
supply indicator lamp switches on.
3. Turn the selector knob to select the
desired programme. If required, select
options (if supplied).
4. Press the Start button to start the
selected programme. Once set, the
programmed data cannot be altered by
turning the programme selector knob.
Note:
once the Start button has been
pressed, the dishwasher memorises the
last programme selected. This
information remains in the memory even
during interruption of the power supply.
To change the selected programme,
press the Start button for about 5
seconds
, until the Start indicator
lamp switches off.
Select a new
programme and press the Start
button.
Note:
if the dishwasher is switched off
during a wash programme, when
switched on again it will resume the
wash cycle from where it was
interrupted.
Only open the dishwasher door if
strictly necessary during a wash
cycle and exercise maximum
caution. Danger of scalding from
steam.
5. To indicate the end of the programme,
the Start indicator lamp switches off
and
the End indicator lamp (if fitted)
lights up
(for about 30 min.)
.
6. Turn the programme selector knob to
the initial position to switch off the
dishwasher (only after the Start
indicator lamp has switched off).
All
the indicator lamps switch off.
7. Open the door (warning: beware of hot
steam). Unload the lower rack before
the upper one. Close the water tap.
Upper rack
Crockery holders:
• Down: cups and long-stemmed
glasses.
•
Up: plates.
Lower rack
Cutlery basket:
• With or without handle (depending
on model).
• The cutlery basket can be removed
to increase available space.
C
C
How to use the dishwasher
Please read the user instructions carefully.
Upper and lower rack