Use and Care Manual

ENGLISH
8
ASSEMBLING THE WATER DISPENSER
5. Install the Exterior Faucet Cover by aligning its hooks with the three square
holes in the door. Fasten the cover on the door with one Screw.
1. Align the Beverage Tank drainage
hole with the upper bar on the
interior door of the refrigerator.
2. Insert the Beverage Faucet hose into
the hole on the exterior of the door.
3. From the interior side of the door,
attach the Beverage Faucet hose
to the door with Plastic Nut.
4. Attach two Hose Clamps to the end
of the Connecting Pipe, then secure
to hoses with Hose Clamps.
6. Fasten the Interior Faucet Cover
to the door with one Screw.
7. Fill Beverage Tank with your beverage of
choice and secure the cap on the top.