Operation Manual

System Status & User Authorities

• The M4 system does not support any wired sensors. The main box communicates with all sensors via wireless RF signal protocols.

• Most of the sensors have low battery warning mechanism. Users would receive notifications before the battery runs out.

• The system can change its security status according to the commands given by users or the signals sent from the triggered sensors.

- ARM:

All working sensors can be

triggered. The system will

gen- erate an alarm when

receiving the trigger signal

sent from sensors.

- DISARM:

This mode will de-activate

all sensors. This mode

will also turn oﬀ the siren

and stop the alarm process.

- HOME ARM:

This mode will allow some

selected sensors to keep

working while others are deac-

tivated. These sensors could

be selectedinApp.

- SOS:

This mode will trigger builtin

siren and send alarm messages

to emergency contacts. It also

triggers external sirens or other

sensors like smart.

- Life-related sensors like Smoke Detector or CO/GAS sensor will keep working all the time.

• There are three levels of user authorities.

- ADMINISTRATOR:

Who can fully control the system

and invite other users with

assigned levels.

- USER:

Who can operate

ARM/DISARM/HOME ARM/SOS

and control the smart plugs and

cameras, also can invite other

people as USER or GUEST.

- GUEST:

Who can only operate

ARM / DISARM / HOME ARM / SOS.