Operation Manual

• Setting Networking

- Hold the Networking Setting Button in the

battery cover until the LED indicator starts flashing.

- Launch the App-[Start to add a main panel]-

[Quick Config Mode],following the guide line to

finish the networking process.

• Check Setting

• Finishing & Mounting

- Make sure your mobile phone has been connected to the Internet via cellular or WiFi.

- Try pressing ARM/DISARM button in App, to see if the status icon in App would be changed immediately.

- Try using remote control, pressing ARM/ DISARM button to see if the status icon in App would be changed immediately.

- Put the battery cover back.

- Place your main box on the desktop or using the bracket to mount it on the wall.