Operation Manual

9
CZ
SK
EN
PL
HU
Notes:
• iPhone or Android smartphone
• iOS version 7.0 or higher
• Android version 4.3 or higher.
• Compatible with Wi-Fi IEEE 802.11 b/g/n standard, M4 supports 2.4GHz WiFi router only.
• Please ensure the router you are using has already been connected to the Internet and DHCP
mode enabled. M4 supports IPV4 protocol only.
Q1: How to do if the indicator of panel always blinking after network con guration?
A: Re-start the panel, then start from STEP2.
Q3: How to do if there is no AP starting with iget_xxxx on smart phone after
re-start the panel?
A: Please long press the "RESET" button at the back side of panel, the panel will
restart after three "beeps", then start from STEP2.
Pic. 1
Q2: How to do if the App shows below snapshot Pic.1 if the indicator
of panel has been  xed?
A: Please press "Reconnect the network".
Q&A