Quick Start Guide

and the battery.

1. Remove the back cover.

2. Set up the SIM card as shown on the phone

and slide it slightly into the slots of the SIM cards.

3. Insert the memory card into the slot as shown

on your device.

4. Insert the battery with the contacts facing the

contacts on the phone. Slide gently the battery in

until it locks. Remember to remove the cover from

the battery contact if it is present.

5. Replace carefully the back cover of the phone,

until you hear, it snaps.

Charging the battery:

Before putting your phone into service you must

recharge its battery.

1. Connect the adapter into the charger. Make

sure that the adapter is inserted in the correct

position. Do not use the force when connecting a

plug.

2. Connect the charger to the wall outlet.

3. If the battery is fully charged, disconnect the

phone from the charger.

Switching the phone on / off / sleep mode:

Make sure that the phone has a SIM card and the