User Manual

9
1.
• Minimise the risk of condensation on the outside of the appliance.
• Minimise operating noises caused by vibration.
Reverse the door
The appliance door can be tted to open to either the left or the right depending on its
location. The appliance will have to be tilted and supported in order to carry this out. It is
advisable to get some help during this procedure.
Important: Do not lay the appliance at as this may damage
the coolant system. Take care when tting and tightening screws.
To change the direction of the door, please follow these
instructions:
1. Ensure the appliance is unplugged and empty.
2. Remove the 2 Screws on the back of the top cover (Fig 1).
3. Lift the rear of the lid and push forward to remove from the
front locators. The top hinge now is accessible (Fig 2).
4. Unscrew the top door hinge located
on the top of the door and then
remove the top hinge that is holding
the door in place. (Fig 3)
5. With help, carefully tilt the unit
backwards and rest the unit on
something solid to stop slipping.
6. Lift the door off the hinge pin and place in
a safe place where it will not get damaged
7. Remove the bottom bushing and bottom
bushing cap and t them on the opposite
side (Fig 4).
8. Unscrew the bottom hinge (Fig 5).
2.
4.3.
5.
6. 7.
9. Remove the levelling foot and t on the opposite side (Fig 6).
10. Screw the bottom hinge on the opposite side loosely (Fig 7).