Quick Guide

QG-WE02-V1.1-1213-EN
6
WiFi Kit Quick Guide
IV Confirm connection
When connection between inverter and data logger is finished and with the power on for about 5 minutes, please check
the 4 LEDs. If POWER, RS485/422 and STATUS are permanently on, the connection should be successful. If any
problems, please refer to G. Debug.
D：Connection setting
The Kit can transfer information via either WiFi or Ethernet, users may choose the appropriate method accordingly.
The configuration of the kit may be set via PC or APP Tool for iPhone and smart phones with Android operation system.
Please visit App Store or Google Play to get SolarMAN App for free.
I. Connection via WiFi
Notice: The setting hereinafter is operated with Windows XP for reference only. If other operating systems are used,
please follow the corresponding procedures.
1. Prepare a computer or device with WiFi, e.g. tablet PC and smartphone with WiFi function.
2. Obtain an IP address automatically.
○
1
Open Wireless Network Connection Properties, double click Internet Protocol (TCP/IP)
○
2 Select Obtain an IP address automatically, and click OK