Quick Guide

QG-WE02-V1.1-1213-EN
23
WiFi Kit Quick Guide
II. Trouble shootings
Phenomenon
Meaning
Solutions
Power off
No power supply
Connect power supply and ensure good contacts.
RS485/422 off
Connection with inverter is
abnormal
Check the connection cable, and ensure that the
cable order comply with descriptions of part III in
this text, or the line order described in Inverter quick
guide .
Ensure the stability of RJ-45.
Ensure that inverter is working under normal
condition.
LINK flashing
Wireless setting In AP mode
The data logger has not been connected to
Internet.Please configure internet connection to the
data logger by following Quick Guide.
LINK off
Connection to remote
server failed
Check if router can connect to Internet
Check if the antenna is loose or falls off. If so, please
screw to tighten.
Check if the device is covered by the range of the
router.
Please refer to User Manul for further information or
have the data logger tested with our diagnosis tool.
Status off
Data logger works
abnormally
Reset. If reset failed for several times, please contact
customer service.
Weak WiFi
Check the connection of antenna
Add WiFi repeater
Connect via Ethernet
Note 1：Please check the status of these 4 LEDS 5 minutes later after the data logger is powered on.
Note 2： When screw or adjust the antenna, please note that only the metal part can be touched, and do
not screw the plastic part, otherwise the antenna may be damaged.
Note 3： If the equipment still fails to work upon above solutions, please contact your device customer
service.