Quick Start Guide

Introduction
Welcome to the wonderful world of wireless charging!
With the Wireless Charge Pad and its transfer speeds
of up to 10W
*
, you’ll never need to plug your phone
in again.
Anti-slip ring
LED indicatorPower input
How to Use
1. Make sure your phone is Qi enabled and capable
of wireless charging.
2. Connect the charge pad to a power source using
the charge cable. The charge pad is compatible
with 5V,2A adapters and QC2.0/QC3.0 fast
charging adapters (9V,1.67A). The indicator light
will illuminate for three seconds when connected
to a power source.
LED lights
up for 3s
Charge
cable
3. Place your device on the charging pad. For the
most effective charging, make sure it’s in the
center of the pad. When the device is charged
successfully, the LED indicator will light up for 16
seconds, then turn off.
Having Problems?
If your device doesn’t charge or the LED light won’t
stop flashing, there may be a problem with your phone
case. Cases that are metallic or over 6mm thick don’t
work with the Wireless Charge Pad. For best charging,
don’t attach anything metallic, including bank cards
with metallic strips, to your phone. Third party cables
and adapters can also cause charging problems.
For Best Results
1. Keep the charger away from water or liquid.
2. Make sure the power is off before cleaning
the charger.
3. Only use the charger indoors
Wireless Charging Pad Instructions